Chronological and geochemical constraints on the pre-variscan tectonic history of the Erzgebirge,Saxothuringian Zone     

《Gondwana Research》2020

A combined U–Pb zircon geochronological and whole-rock isotopic and geochemical study has been carried out on high-grade orthogneiss, meta-basite, and meta-sediments from the Erzgebirge. The results indicate multiple pulses of Ediacaran–Ordovician magmatism in a transitional volcanic-arc to rift-basin setting. Orthogneiss from high-pressure nappes exhibit a step-like pattern of inherited zircon ages and emplacement ages of 500–475 Ma. In contrast, granite gneiss from the medium-pressure core of the Erzgebirge is characterised by three pulses of magmatism in the Early Cambrian, Late Cambrian, and Early Ordovician. A trend of decreasing Th/U ratios in zircon is observed to c.500 Ma, after which significant increases in the trend and variability of the data is inferred to mark the transition from arc-related to rift-related magmatism. Sediments deposited in the Early Cambrian have continental island arc affinity. Major detrital peaks in the Ediacaran and subordinate Tonian, Palaeoproterozoic, and Neoarchaean data are consistent with an Avalonian-Cadomian Arc and West African Craton derivation. The Early Cambrian sediments were locally reworked by a thermal event in the Ordovician resulting in leucocratic banding and recorded in Ordovician zircon rims characterised by systematically lower Th/U ratios. Ptygmatically folded leucocratic bands containing Ordovician zircon rims, associated with low Th/U ratios, are further observed in the granite gneiss core of the Erzgebirge. Variscan ages are rare, except in a fine-grained high-pressure micaschist, which contains exclusively small, structure-less, zircon with a weighted mean age of 350 ± 2 Ma. These data, along with a re-evaluation of previously published data, have been interpreted as the product of flattening subduction during the Early Cambrian; followed by the opening of slab windows in the Late Cambrian; and finally delamination in the Early Ordovician. Delamination of the orphaned slab led to asthenospheric upwellings triggering extension, bimodal magmatic pulses, recycling of fertile crust, high-temperature metamorphism, and cratonisation of relatively young crust.  相似文献   

安徽庐枞盆地泥河玢岩型铁矿床地质-原生晕地球化学找矿模型   总被引：1，自引：1，他引：0  

张赞赞  张舒  吴明安  写熹  吕博  魏国辉 《矿床地质》2020,39(2):305-325

开展长江中下游地区玢岩型铁矿床轴向原生晕地球化学分析及建模,可弥补地球物理勘探结果的多解性及探测精度的局限性,对定位和评价深部盲矿体具有至关重要的作用。文章在以往研究的基础上,开展庐枞盆地泥河玢岩型铁矿床钻孔原生晕的研究工作,采用多元统计分析方法,查明了主要成矿指示元素在不同地质体中的富集和亏损,确定了磁铁矿、硫铁矿和硬石膏矿体的矿中、近矿及远矿指示元素组合,结合矿床成因模型,建立了泥河玢岩型铁矿床地质-原生晕地球化学找矿模型,通过罗河和小包庄玢岩型铁矿床的佐证,认为该模型可以应用于长江中下游成矿带玢岩型铁矿床的勘探工作中。  相似文献   

西藏雄村斑岩型铜(金)矿床Ⅰ、Ⅱ号矿体热液黑云母特征及地质意义     

肖鸿天  谢富伟  郎兴海  冉凤琴 《岩石矿物学杂志》2020,39(4):469-480

雄村铜(金)矿区位于西藏冈底斯成矿带中段南缘,由Ⅰ、Ⅱ、Ⅲ号矿体和多个矿化体组成。本文以Ⅰ、Ⅱ号矿体钾硅酸盐化蚀变带内的热液黑云母为研究对象,采用光薄片镜下鉴定、电子探针等分析方法,系统研究了热液黑云母的产状和成分特征。结果显示,雄村矿区Ⅰ号矿体黑云母类型主要为金云母和镁质黑云母;Ⅱ号矿体黑云母类型为镁质黑云母。两个矿体黑云母都具有低Ti(TiO_2 3%)、高Al(Al_2O_315%)的特点,且具有较高的MgO含量,Mg/Fe0.5,K/Na10,显示了与矿化良好的相关性。Ⅰ号矿体热液黑云母平均结晶温度470℃,氧逸度位于镍-氧化镍缓冲剂与磁铁矿-钛铁矿缓冲剂之间(NNO—HM);Ⅱ号矿体热液黑云母平均结晶温度234℃,氧逸度位于镍-氧化镍缓冲剂与铁橄榄石-石英-磁铁矿缓冲剂之间(NNO—FQM),说明Ⅰ号矿体形成于较高温、高氧逸度的热液系统,Ⅱ号矿体形成于相对较低温、低氧逸度的热液系统。此外,Ⅰ号矿体热液黑云母Ⅳ(F)值介于0.61～2.72之间,平均值1.26,Ⅳ(Cl)值介于-5.49～-4.53之间,平均值-5.03,Ⅳ(F/Cl)值介于5.63～7.89之间,平均值6.29;Ⅱ号矿体热液黑云母Ⅳ(F)值介于1.83～3.32之间,平均值2.66,Ⅳ(Cl)值介于-5.64～-4.89之间,平均值-5.31,Ⅳ(F/Cl)值介于7.14～8.68之间,平均值7.97,说明Ⅰ、Ⅱ号矿体都形成于富Cl的热液系统,且Ⅱ号矿体热液较Ⅰ号矿体更富Cl,贫F。富Cl流体易萃取流体中的Cu和Au等金属元素并以Cl的络合物形式运移,在沿构造裂隙向上运移的过程中,物理化学条件发生改变,使得流体中金属元素络合物溶解度降低,促使硫化物沉淀成矿。  相似文献   

库车坳陷克深气田致密砂岩储层构造裂缝形成序列与分布规律     

王珂  杨海军  李勇  张荣虎  杨学君  王俊鹏 《大地构造与成矿学》2020,(1):30-46

综合采用岩心、薄片和成像测井等资料,对库车坳陷克深气田白垩系巴什基奇克组构造裂缝的形成序列、分布规律和影响因素进行了研究。结果表明:剪切裂缝和张性裂缝在克深气田均有发育,以直立缝和高角度缝为主,主要形成于近南北向的挤压作用、背斜弯曲拱张作用和异常流体高压作用,微观裂缝切穿胶结物和部分颗粒,早期充填构造裂缝可在后期构造应力和异常流体高压作用下重新裂开成为有效裂缝。克深气田发育3期构造裂缝,其中第3期构造裂缝的形成时间与天然气大量充注期吻合,是工业规模性气藏形成的关键因素。单个断背斜高部位的构造应力低于背斜翼部,因此背斜高部位的构造裂缝线密度相对较低,但背斜弯曲变形使裂缝开度较大,有效性好,单井的无阻流量较高;翼部和断层附近构造裂缝线密度较大,但开度较小,有效性差;构造应力、岩石强度和变形时间的不同造成了构造裂缝特征在各气藏之间具有差异性。储层中部第3砂层组的构造裂缝发育程度中等,充填程度相对较低,并且平面上分布连续,可形成连片分布的储层“甜点”区,应成为克深气田开发中的重点层位。对克深气田构造裂缝起主要贡献作用的为水下分流河道和河口坝微相的粉‒细砂岩。  相似文献   

鄂尔多斯盆地西南部三叠纪末抬升剥蚀事件及热年代学记录   总被引：1，自引：1，他引：0  

王建强  刘池洋  赵红格  张东东  ZATTIN Massimiliano  彭恒 《岩石学报》2020,36(4):1199-1212

三叠纪末期大型鄂尔多斯盆地遭受了中生代成盆以来首次较大规模的抬升剥蚀,显著改造了中晚三叠世延长期盆地面貌,并控制了侏罗纪早期沉积格局和油藏分布,对盆地演化及矿产资源分布产生了重要影响。本文利用地质及大量钻井资料揭示了该期构造事件对盆地的剥蚀改造特征,盆地及周邻地区磷灰石裂变径迹年代学记录并约束了此次构造抬升的时限与过程;综合周邻区域构造研究成果,探讨了其发育的动力学背景。结果表明,鄂尔多斯盆地三叠纪末期的剥蚀具西南强、东北弱的特点,西南部大范围内延长组地层残缺不全,剥蚀量最大可达1000余米;前侏罗纪沉积古地貌总体呈西南高、北东低的特点;其抬升时间始于205～190Ma,西南部稍早于盆地腹部,抬升速率大于1℃/Myr,可持续至中侏罗世(约160Ma)。该期抬升剥蚀事件范围可涉及至盆地西南缘更广阔的区域,与同期秦岭造山带内出现的快速抬升冷却事件具有较好的时空耦合关系,是对秦岭造山带区域构造环境转变的响应和纪录。该研究丰富和发展了三叠纪末期构造事件在华北克拉通的影响,对该区油气、煤炭资源的进一步勘探和评价提供了新的思路,具有一定的现实意义。  相似文献   

北山造山带中部(甘肃段)花岗岩成因及构造背景   总被引：2，自引：2，他引：0  

白荣龙  刘显凡  周慧玲 《岩石学报》2020,36(6):1731-1754

北山造山带中部花岗岩体以陶勒努图洪岩体和跃进山南岩体为代表,本文对这两个岩体进行了LA-ICP-MS锆石U-Pb定年、全岩地球化学和原位锆石Lu-Hf同位素分析,结果表明:岩体成岩年龄分别为410±2. 8Ma、427±2. 5Ma;主量元素呈现高硅、高钾钙碱性、准铝质-弱过铝质特征;微量元素表现为富集Th、Zr、Hf等及大离子亲石元素(Rb、U、K等),亏损Ba、Sr、Eu及高场强元素(Nb、Ta、P、Ti等);球粒陨石标准化稀土元素曲线呈轻稀土富集、重稀土亏损的右倾模式。综合分析认为跃进山南岩体属A型花岗岩,陶勒努图洪岩体属S型花岗岩。陶勒努图洪和跃进山岩体锆石ε_(Hf)(t)分别为-2. 90～-0. 12(平均值为-1. 53)、-1. 99～2. 82(平均值为0. 26),t_(DM2)分别为1. 41～1. 58Ga、1. 23～1. 54Ga。研究表明:陶勒努图洪黑云母花岗闪长岩岩浆源区主要为由元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质(含中基性岩石)部分熔融的产物,跃进山南二长花岗岩体可能在元古界北山杂岩组成的以变质杂砂岩为主的古老地壳物质重熔过程中有幔源岩浆的参与。在中志留世(427Ma)明水-小黄山洋已向南侧马鬃山-公婆泉弧之下俯冲至后期,板块后撤引发明水-旱山地体南缘弧后形成裂解环境导致幔源岩浆底侵,诱发地壳物质重熔形成花岗质岩浆,岩浆侵位形成跃进山南二长花岗岩体;至早泥盆世(410Ma),俯冲结束发生弧-陆碰撞造山导致地壳增厚,引发下地壳发生部分熔融产生的花岗质岩浆侵位形成陶勒努图洪岩体;两岩体是在早、晚古生代交接时段同一俯冲-碰撞构造背景下不同部位、不同亚构造环境下的产物。  相似文献   

江汉盆地典型二级构造带特征分析     

卢圣力  赵江  王秋良 《大地测量与地球动力学》2019,39(3):226-230

在三维地震资料的基础上，依据构造带划分原则，把江汉盆地构造带划分为三大类，分别为断裂、盐构造及古潜山，共25个，并分别在3个类别中选取一个典型构造带进行讨论研究。  相似文献   

龙泉山断裂带断层最新活动年代及方式     

刘亮  梁斌  燕中林  苏画  何学锋 《中国地质调查》2020,7(5):77-87

龙泉山断裂带属龙门山前陆隆起,与青藏高原龙门山的隆升演化密切相关。为探讨龙泉山断裂带断层活动方式、期次及年代特征,在该断裂带不同部位采集了断层泥样品,通过扫描电镜(SEM)对样品中的石英颗粒进行了痕迹微形貌和溶蚀微形貌观察,通过电子自旋共振(ESR)测试了样品断层的最新活动年龄,并结合区域地震资料,进一步研究了龙泉山断裂带断层的发震潜力。结果表明: 龙泉山断裂带断层运动方式以黏滑为主,兼蠕滑; 具有多期次活动特征,强烈活动时间为早更新世—中更新世,晚更新世也有明显断层活动,全新世断层活动不明显; SEM 、ESR、热释光(TL)测得的断层最新活动年龄为(1 210±121)~(110±10.0) ka; 最新活动年代和活动性具有分段性,中段断层活动性较弱,北段和南段断层活动性较强。总之,龙泉山断裂带为1条活动性断裂带,具有一定的发震潜力,地震沿断裂带呈带状分布,但相比其西侧的龙门山断裂带,其活动性已大大降低。  相似文献   

Deep gold mineralization features of Jiaojia metallogenic belt,Jiaodong gold Province: Based on the breakthrough of 3000 m exploration drilling     

《China Geology》2020,3(3):385-401

Recently, continuous breakthroughs have been made about deep gold prospecting in the Jiaodong gold province area of China. Approximately 5000 t of cumulative gold resources have been explored in Jiaodong, which has thus become an internationally noteworthy gold ore cluster. The gold exploration depth has been increased to about 2000 m from the previous <1000 m. To further explore the mineralization potential of the Jiaodong area at a depth of about 3000 m, the Shandong Institute of Geological Sciences has drilled an exploratory drillhole named “Deep drillhole ZK01” to a depth of 3266 m. Hence, as reported herein, the mineralization characteristics of the Jiaojia metallogenic belt have been successfully documented. ZK01 is, to date, the deepest borehole with an gold intersect in China, and constitutes a significant advance in deep gold prospecting in China. The findings of this study further indicate that the depth interval of 2000 m to 4000 m below the ground surface in the Wuyi Village area incorporates 912 t of inferred gold resources, while the depth interval of 2000 m to 4000 m below the surface across the Jiaodong area possesses about 4000 t of inferred gold resources. The Jiaojia Fault Belt tends to gently dip downward, having dip angles of about 25° and about 20° at vertical depths of 2000 m and 2850 m, respectively. The deep part of the Jiaojia metallogenic belt differs from the shallow and moderately deep parts about fracturing, alteration, mineralization, and tectonic type. The deep zones can generally be categorized from inside outward as cataclastic granite, granitic cataclasite, weakly beresitized granitic cataclasite, beresitized cataclasite, and gouge. These zones exhibit a gradual transitional relation or occur alternately and repeatedly. The mineralization degree of the pyritized cataclastic granite-type ore in the deep part of the Jiaojia metallogenic belt is closely related to the degree of pyrite vein development; that is, the higher the pyrite content, the wider the veins and the higher the gold grade. Compared to the shallow gold ores, the deep-seated gold ores have higher fineness and contain joseite, tetradymite, and native bismuth, suggesting that the deep gold mineralization temperature is higher and that mantle-sourced material may have contributed to this mineralization. ZK01 has also revealed that the deep-seated ore bodies in the Jiaojia metallogenic belt are principally situated above the main fracture plane (gouge) and hosted within the Linglong Granite, contradicting previous findings indicating that the moderately shallow gold ore bodies are usually hosted in the contact zone between the Linglong Granite and Jiaodong Group or meta-gabbro. These new discoveries are particularly significant because they can help correct mineralization prospecting models, determine favorable positions for deep prospecting, and improve metallogenic prediction and resource potential evaluation.  相似文献   

西昆仑玛尔坎苏石炭纪大型锰矿带构造背景与成矿条件     

张连昌  张帮禄  董志国  谢月桥  李文君  彭自栋  朱明田  王长乐 《吉林大学学报(地球科学版)》2020,50(5):1340-1357

西昆仑北段玛尔坎苏地区探明的大型碳酸锰成矿带，是我国近年最重要的找矿成果之一。该锰矿带构造上属北昆仑晚古生代弧后伸展盆地，其构造动力学背景为古特提斯洋向北俯冲于塔里木地块之下形成的弧盆体系。锰矿体主要发育于晚石炭世喀拉阿特河组含炭泥质灰岩夹薄层灰岩中。矿石中主要金属矿物为菱锰矿（75%~95%），次为软锰矿、硫锰矿及少量黄铁矿等。含锰岩系岩性和岩相学研究表明，玛尔坎苏锰矿带属典型的海相沉积锰矿床，其矿床成因可能与晚古生代半局限盆地沉积和海底热液活动有关。海底热液活动可能为成矿提供了丰富的物质来源。含锰岩系元素和同位素地球化学特征表明，玛尔坎苏锰矿沉淀时的水体环境为常氧条件，而矿层下盘（部分）岩系的岩性及地球化学特征反映其沉积时的水体环境为低氧—贫氧条件。玛尔坎苏锰矿带锰矿石具有负的δ¹³C值（-23.3‰~-10.0‰），推测有机质导致的还原作用是该锰矿由原生氧化锰在成岩期转化为菱锰矿和形成富锰矿的重要机制。  相似文献